ClickCease Upenders, Coil and Paper Tippers – Superlift Material Handling
Custom Upender - Superlift Material Handling

Upenders, Coil and Paper Tippers

Superlift offers a full line of hydraulic upenders in capacities from 1000 to 50,000 lbs,  Angle of tilt to 90 degrees and platform sizes up to 120 x 120 inches  Custom layouts to meet your specific applications is our specialty. Long life is guaranteed 

90 degrees with powered vertical and horizontal Axis, we have what you need.

Heavy Duty construction with solid steel decks and heavy wall tube supports.  Long lasting bearings, not Teflon bushings we have upenders that have worked service free for 20 years before any major repair.  We want you to compare our upender designs side by side and you will see that for repositioning rolls, heavy equipment, cylinders containers, coils, and spools. Superlift upenders are the answer whether you need hydraulically or pneumatically powered. 

  • Heavy-Duty, Electrohydraulic 1,000 to 30,000 lb. Capacity
  • Mounted or Free-Standing
  • A-Primary Platform
  • B-Secondary Platform

    Standard Features:

    • Internally-mounted 11/2HP, 230V, 1 PH, 60Hz, or 208/230/460V, 3PH. 60Hz intermittant duty TENV super torque motor or 3HP, 208/230/460V, 3PH, 60Hz, continuous duty TENV motor (specify required voltage)
    • 24V operating control voltage
    • NEMA-4 constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" pushbutton box with 8 ft. straight cord
    • NEMA-12 prewired controls (dust/ drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
    • Limit switch and mechanical stops in both directions
    • 10 ft. power cord (connector plug not included)
    • Smooth steel tops with 3.75 in. straight safety toeguards with black and yellow safety stripes on toeguards
    • Double acting hydraulic cylinders
    • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
    • Surfaces degreased, oxide primed and finished with two coats of Safety Yellow enamel
    • Lifetime self-lubricating, anti-friction bushings at all pivot points
    • Internal high-pressure gear pump with manifold-mounted check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
    • Includes hydraulic oil